How To Remove A Stripped Power Steering Line. Drain pump.remove pulley off with removal tool. Drain the power steering fluid from the reservoir.
A wrench behind the fitting slightly larger than the supply line to guide the fitting into the hole. Further, a groove, even when aligned, doesn't help prevent leaks. If they aren't lined up, it's not on center.
The input shaft provides a clue too. Replace pulley with pulley tool.add ps fluid. Videos available online to show how to do for free.
Loosen the adjustment bolt and the bolt holding it in (like how alternator is) and it dropped out. Auto stores with loaner tool programs for free with deposit. The metric box threads are different, but are close enough that.
Drain the power steering fluid from the reservoir. When the spline gaps line up with the axis of the steering box, its on center. However as a first step i would clean up as much of the fluid as you can, then stuff a bolt or even a dowel into the tube you cut off to lower the amount of fluid exposed to the next step.
Following are the some best yet general stop leaks that come with different compositions, varieties. One morning, power steering fluid spilled all over the garage floor. Inspect the top of the power steering reservoir for bubbles.
A wrench behind the fitting slightly larger than the supply line to guide the fitting into the hole. Next, loosen the inner line and lift it off the gearbox. Remove the leaking hose and replace it with a new section.