How To Fix The Pull Cord On A Craftsman Lawn Mower. If the old starter is riveted to the blower housing, you will need to drill out. Replace the old pull cord with a new one;
Burn the end of the new one and feed it back through as before. Hacks that will make your pull cord spring fixing easier: To start, inspect your blade for any stuck strands of grass or debris.
The mower cord is connected to a hub, and this hub spins when you pull the cord. Pull the cord out all the way, secure the pulley, use a screwdriver to lock the spokes of the pulley, stops it retracting. Remove three or four screws holding starter assembly on (instructions follow on recoiling the spring).
Use the correct form to start up your mower using the correct form to start up your mower can make things a lot easier. The procedure for this lawnmower will be the same on some honda lawnmowers. 10 steps to replace the pull cord.
The mower will smoke for about 20 minutes after this repair due to the residual oil in the head. This can consume a ton of your time which can annoy you. Next, you will need the tip the mower to where it's only on the front wheels to drain any gas/oil from the head.
The easiest way to complete this repair is to replace the entire starter assembly as a unit (part 497680). Remove them as they cause the pull cord to get stuck. If you have a mower that does not feature this type of mechanism, the mower blades may be blocked with grass, twigs, stones, plastic, or debris in general.
Remove the old pull cord; Hacks that will make your pull cord spring fixing easier: Fit the pull handle and double knot.