Video How to Replace Alternator 2002-2005 Ford Explorer
CHANNEL YOUTUBE : TRQ
How To Change Alternator 2005 Ford Explorer. Disconnect the wiring harness from the alternator. Ford explorer 2005, professional™ alternator by acdelco®.
How To Replace Alternator 94-05 Ford Explorer 4.0L - Youtube from www.youtube.com
Ford explorer 2005, professional™ alternator by acdelco®. You should get a reading of between 13/14 volts. Shop wanted $900 to fix it so i bought the replacement alt myself for $200 from autozone and planned to do the work myself, also replacing the serp belt.
As Your Explorer Begins To Eat Through The Voltage Stored In The Battery, The Headlights Will Begin To Fade.
Again you should get 13/14 volts if your getting below 13 the alternator is not putting out enough. This will also work on ford rangers of the same year with. This might include replacing the voltage regulator if it is separate from the alternator.
Then Push Your Tensioner Down And In With A Wrench And Slide The Belt Underneath The Wrangler And We're All Set.
Remove the mounting bolts on the alternator with a socket wrench and the alternator pulley, if needed. When these codes set the throttle goes into limp mode to prevent vehicle from accelerating out of control. Shop wanted $900 to fix it so i bought the replacement alt myself for $200 from autozone and planned to do the work myself, also replacing the serp belt.
They Are Accessible From The Passenger Side Front Fender.
Use a volt meter across battery live and ground terminals. Ford explorer 4.0l with ford alternator 2005, alternator by id select®. Take the belt up and over the water up around the car steering pump and ac compressor.
If Not Put Red Voltmeter Wire To B+ Wire On Alternator And Voltmeter Black To Negative Battery Terminal.
Install the new alternator by reversing the procedure. A ford explorer alternator replacement costs between $460 and $549 on average. Get a free detailed estimate for a repair in your area.
Locate The Three Alternator Bolts.
If you notice that your headlights dim or your battery won't stay fully charged, it may be time to replace your alternator or other related parts. Install the new alternator assembly and reverse the removal procedure. Remove the clip using a flat blade screwdriver;