How To Replace Clutch Pedal Bushing. Hey guys need some help. You simply remove the four old bushings from the bracket and brake pedal and slide in the replacements.
The clutch pedal bushings work as a friction surface for the clutch pedal and the mounting pin surface. Once you have the instrument cluster out you will be able to see where the spring attaches. Install the pedal back on the shaft fron inside and put the clips back on from the access hole.
If you suspect the bushings are worn, grab the clutch pedal and move it side to side. If there is excessive movement, replace the clutch pedal bushings. The front drivers seat (to have more room to work) 2.
For longer life and smoother pedal action, smear a small amount of white lithium grease on the inside of each bushing, and then reassemble in reverse order of removal. On a manual car, the pivot shaft is part of the clutch pedal. You simply remove the four old bushings from the bracket and brake pedal and slide in the replacements.
So if you take the squarish retainer clip off the passenger side (a thin screwdriver will open the clip up, and then it needs to slide in the direction of the opening and then pull straight off), then the clutch pedal will pull out the driver side. All you have to to is remove the small philips head screws along the bottom and them it should pop off. Unplug and remove brake pedal switch 5.
Your clutch pedal will be held in the same way your brake pedal is. The clutch pedal bushings work as a friction surface for the clutch pedal and the mounting pin surface. Attach the emergency brake assembly back in place and the little white sensor.
Is300 clutch pedal squeak fix! You'll have to just replace the bushing that seats the torsion spring in the clutch pedal. How difficult is it to change out the pedal bushings in my 68.