Video "close up view" How to w clip transmission line to radiator connect disconnect remove put on #wclip
CHANNEL YOUTUBE : showgirls around the world a dancer family
How To Install Transmission Line Clips. Using a pick or small screwdriver, remove the metal retaining clip. This transmission oil cooler line clip is a direct replacement for an original equipment clip that is corroded or has become damaged or lost during service.
Automatic Transmission Cooler Line Clips. 3 Piece 6382 from www.northerncorvette.com
Install the cooler line straight into the quick connect fitting. As we saw before, for the step incident at the transmission line input, the transmission line behaves in exactly the same way as a resistor of value √ (l/c)=z0=50ohms. Keep the items necessary for any transmission line repair readily available with dorman s transmission line repair kit.
2, Cooler Line Connection With Original Plastic Cap And Spring Clip Fig.
That motion opens up the clip so you can remove and install it on the end of the shift rod. How to remove ez clips on most 90's & newer gm radiators & transmissions. 12) remove the jack and all tools from underneath the vehicle.
Order 1 For Each, And Make Sure It Is Correctly Installed When Replacing.
Includes fittings for most transmission lines. Install the cooler line straight into the quick connect fitting. The 4l60e transmission cooler line flow is very easy to follow.
As We Saw Before, For The Step Incident At The Transmission Line Input, The Transmission Line Behaves In Exactly The Same Way As A Resistor Of Value √ (L/C)=Z0=50Ohms.
The tool also holds the clip firmly to the end so you can reach up into the side of the transmission tunnel and work the clip on and off the end of the shift rod. You insert this little tool in the back of the clip and then twist it. If not familiar, one can install it backward.
The Clamp Around The Connector Is Intended To Grip And Pull It Together Tightly.
The below transmission cooler installation diagram shows the transmission fluid flow direction and how the fluid will be routed through a new external cooler. Rebanal kenneth llaneta clint mark logronio dan ray tria 3. You will have the same ez clip on each end of your lines for the radiator and the.
It Would Be A Major Hassle Doing Two Separate Jobs On The Transmission Cooling System When It Comes To Time And Fluid Costs.
Insert the coller line end into the quick connect fitting until a click is either heard or felt. Fyi, some vehicles have the factory cooler on the bottom of the. This transmission oil cooler line clip is a direct replacement for an original equipment clip that is corroded or has become damaged or lost during service.
