How To Change Serpentine Belt On 2007 Saturn Aura. 1.begin with opening the hood and locating drive belt system. In the most cases, on 2007 saturn aura xe, there is belt tensioner that allows the proper tension to easily be adjusted.
First, loosen the tensioner to get the serpentine belt off. Using a serpentine belt tensioner tool or wrench or ratchet tool: 1.begin with opening the hood and locating drive belt system.
In my van i had to get a belt tensioner pulley tool because the tensioner pulley is so close to the. Serpentine belt change user name: Rotate/move the tensioner pulley/arm away from belt contact area on the tensioner.
Service type serpentine/drive belt replacement: Take those out, and you will have full access to the belt and the tensioner. It's a pretty good websight.
Rotate/move the tensioner pulley/arm away from belt contact area on the tensioner. Daycoproducts.com, click cars and trucks, then go to serpentine belt. You should see it when you open the hood.
How to change serpentine belt on aura xr v3.6l? Service type serpentine/drive belt replacement: I finally gave up and got help changing the belt and the idler and tensioner pulleys.
If it is not there, all chrysler, dodge, and plymouth minivans, from 1993 to at least 1999, used the same 3.3l engine setup, so find someone with one and look for the diagram where i. Take off, or loosen the front half of the wheel well. To install the new automotive serpentine belt replacement, check the motor or the operator’s manual for a serpentine route guide.