Video 2004 Chevy Silverado 4L60e Transmission Fluid and Filter Change - Tahoe Suburban Sierra Yukon 1500
CHANNEL YOUTUBE : The Sundae Drive
How To Change 4L60E Transmission Fluid. The screws will hold the filter housing in place over the transmission’s sump, which is where its reservoir of fluid; If your vehicle is equipped with a deep pan, then an extra quart or more will be required.
4L60E Transmission Fluid And Filter Change | Cpt 4L60E from cpt4l60e.com
If your vehicle is equipped with a deep pan, then an extra quart or more will be required. After removing the pan and filter and placing a large pan under the trans i made up a heater hose that fit snug into the filter hole. How to change automatic transmission.
After Removing The Pan And Filter And Placing A Large Pan Under The Trans I Made Up A Heater Hose That Fit Snug Into The Filter Hole.
As mentioned before, if this is your first time doing a fluid and filter change, you might have a tougher time, but take your time and be careful about dropping the pan, and you will be good to go without taking. If your vehicle is equipped with a deep pan, then an extra quart or more will be required. This quantity is based on a stock with a 12 “torque converter” swallow type of pan.
Steps For Changing 4L60E Transmission Fluid:
How to change automatic transmission. How to change your 4l60e transmission's fluid, filter and oil pan gasket. This volume is based on a stock, with a 12 “torque converter,” shallow “transmission pan.” the ability of additional fluid will range from an extra quart or more with a deep pan.
The 4L60E’s Fluid Volume Is 12 Quarts (Dry) Of Transmission Fluid.
You'll do this a total of 3 times. 4l60e transmission fluid change intervals. Jack transmission up, remove the 1.25 inch block and lower it.
A Large, Flat Work Space Is Necessary To Remove The Pan And Transmission Filter.
This volume is based on a stock, with a 12 “torque converter,” shallow “transmission pan.” the ability of additional fluid will range from an extra quart or more with a deep pan. How many quarts does it take to do a fluid and filter change on a 4l60e trans? For instance, if you experience more traffic, races, and tow, it’s advisable to replace your transmission fluid in 4l60e every 32,000 miles.
I Put The End Of The Hose In A Quart Of Trans Fluid And Started It Without The Pan.
How to replace transmission (4l60e) filter & gasket 00. Once you are done with these 3 items, you can drop and pull out the pan with minimum amount of fluid. The fluid capacity of the 4l60e is 12 quarts of transmission fluid (dry).
