How Do You Remove A Pulley From An Alternator. To check the alternator clutch pulley first remove the plastic cap. Needed to remove the pulley , do not overheat.
Most automotive alternator pulleys use a 15/16 socket. Place the pry bar between the alternator and the engine, and push the alternator out, away from the engine. Insert the removed screws into these holes.
The damaged pulley caused the belt to be destroyed really fast. To check the alternator clutch pulley first remove the plastic cap. To remove the alternator pulley, use a 1/2 drive impact wrench to loosen the nut.
Insert the removed screws into these holes. Install the new pulley , lock washer, and nut by hand. How do you remove a pulley without a tool?
Most automotive alternator pulleys use a 15/16 socket. To remove the alternator pulley, use an impact wrench to loosen the nut with one hand, while holding the alternator pulley with the other. You should use a rag or better a heavy glove.
To remove the alternator pulley, use a 1/2 drive impact wrench to loosen the nut. The pulley would have about 2 to 3 extra holes. From there, it’s about a 30 second press job (see pix).
The alternator pulley removal process in this case typically involves placing the specialized puller on the alternator and then turning it until the pulley comes off. How do you remove a pulley from an alternator? To remove the alternator pulley, use a 1/2 drive impact wrench to loosen the nut.