How To Change Serpentine Belt Chevy Silverado. Let's go ahead and remove the belt. Release the belt tensioner and the belt will tighten up against the idler pulley.
The first thing you are going to need to do is find the tensioner and apply force to it in order to loosen the serpentine belt. Release the belt tensioner and the belt will tighten up against the idler pulley. Check the tension of the belt by hand.
Pull the belt off of the idler pull. Bring the belt up around the water pump. Locate the serpentine belt diagram.
If you were to look at the other end where connects onto the throttle body, you're gonna see another clamp. If playback doesn't begin shortly, try restarting your device. Then, use a wrench to relieve the auto tensioner so you can pull the belt off of the.
Your silverado uses a tensioner to keep the serpentine belt tight. Put the ratchet back on the tensioner bolt head and turn it clockwise with one hand and with the other hand, slide the belt under the idler pulley. Removing the serpentine belt (0:37) familiarize yourself with the belt routing diagram.
Turn the tensioner clockwise to loosen the belt; Attach a 15mm socket and ratchet to the serpentine belt tensioner; The first thing you are going to need to do is find the tensioner and apply force to it in order to loosen the serpentine belt.
If it needs replacement, then locate the tension pulley. With the tension relieved from the belt, pull it off of the pulley that has been placing tension on it, then remove it from the around the rest of the pulleys on the engine. Rotate the tensioner clockwise, allowing it to tighten the belt.